How can it be safe to use drowning water for livestock? In Surabaya, some areas known as "Zhuishui" have water that is not suitable for direct use by pigs. The composition of this water is complex and often contains harmful substances, making it unsuitable for animal consumption. The nutritional balance is poor, with a lack of plant-based proteins and an overabundance of animal proteins, which negatively affects pig growth and health. As a result, pigs grow slowly, typically taking six to seven months before they are ready for slaughter. They are also prone to infectious and parasitic diseases, leading to frequent cases of sick or dead pigs, which poses a significant financial risk to farmers.
To address these challenges, proper treatment is essential. Using the Golden Retriever water-feeding starter after processing ensures a safer feeding method. When combined with Jinbao Hydrophobic (Zhuishui) fermentation agents, which are made from safe and effective fermented feed, the growth period can be significantly reduced—from six to seven months down to less than five. This not only improves efficiency but also reduces fuel and labor costs, while lowering the workload for farmers. The results are comparable or even better than using full-price feed.
Pigs raised with this method show healthier skin, with a reddish, shiny appearance and no foul odors in the pigsty. The environment becomes cleaner and more pleasant. For more details, visit our website or contact us directly for further information.
Roundness tester is a length measuring tool for measuring roundness using the rotary axis method. The roundness meter is a measuring tool for measuring the roundness error of the workpiece using the rotary axis method. Roundness tester is divided into two types: sensor rotary type and workbench rotary type. During measurement, the measured part is installed concentrically with the precision shaft system, and the precision shaft is attached with an inductive length sensor or a workbench for precise circular motion. It is composed of sensor, amplifier, filter and output device of the instrument. If the instrument is equipped with a computer, the computer is also included in the system.Roundness Tester
The principle of the roundness meter is the same as that of the coordinate measuring machine. In fact, its working principle is very simple. The coordinate measuring machine is a point acquisition tool. Its principle is to collect points first, and then form a line from points, and then form a three-dimensional model from lines. CMM is a kind of measuring equipment that has a guiding mechanism, a length measuring element, a digital display device in three mutually perpendicular directions, and a worktable that can place the workpiece (not necessarily large or huge). The measuring head can be moved to the measured point easily by manual or motorized means, and the coordinate value of the measured point is displayed by the reading device and the digital display device. Obviously, this is the simplest and most primitive measuring machine. With this measuring machine, the coordinate value of any point in the measured volume can be displayed through the reading device and digital display device.
Roundness Measuring Instruments ,Roundness Measuring Machine,Instrument Used To Measure Roundness,Roundness Tester,Gear profile measuring instrument
Zhejiang dexun instrument technology co., ltd , https://www.dexunmeasuring.com