1 The agro-technical throwing machine has a higher demand for agronomic technology, which is mainly divided into two parts: cultivating seedlings and flattening fields:
1.1 Technical requirements for seedlings Seedlings used in seedling machines, unlike hand transplanted seedlings, must use seedlings cultivated in “beehole†plastic floppy disks. Whether or not seedlings meet the requirements of a thrower will have a direct impact on the quality and efficiency of the dumping, and even affect the success or failure of mechanized dumping technology. Therefore, it is necessary to combine agronomic and agricultural machinery to cultivate qualified seedlings.
1.1.1 The tray must be a plastic floppy tray with no limitation on specifications.
1.1.2 Seedling height is generally three-leaf and one-hearted, suitable for the range of 80-200 mm. The age of 20-25 days is more suitable.
1.1.3 The soil moisture content of seedlings should be 40%-60%.
1.1.4 seedlings with muddy seedlings root with mud, mud must have a certain viscosity, the formation of muddy, easy to throw and seedlings upright mud.
1.1.5 The quality of seedlings leaves is dark green, robust, and grows evenly. The white roots are entangled, disease-free and flexible.
1.2 Technical requirements for Putian After soaking, Putian should be ploughed, brushed, ground, leveled, and deeply buried with straw (stalks) so that the fields are flat, muddy, muddy and not muddy. "The appearance of melon" water, the surface of the field into a slurry.
1.2.1 Before transplanting, the plowing and plowing field must be settled for 1-2 days according to the soil type. Usually, the paddy field is precipitated for 1-1.50 days. Black clay precipitated for 2-2.50 days. Yellow mud Pakistan precipitation precipitation l-20 days. If the seedlings are thrown into the field without sedimentation, the seedlings will be sucked into the mud with the living mud. Affect seedling growth and low birth.
1.2.2 The depth of water in Putian is generally 1-3 cm. It is best if no mud is exposed. If it is too deep and easy to float, it will be too shallow or waterless, which will increase the forward resistance of the casting machine. The walking trajectory of the casting machine cannot be closed in time, resulting in uneven formation of the Putian. Therefore, the moderation of Putian water is also critical.
1.2.3 When seedlings are thrown into the field and thrown into the field, they cannot stand upright for 3-5 days, or when other factors have fallen (sleep) in the field, artificial remedies can be taken. Artificially applied to the field with 1.50-2.50 centimeters in diameter and 3 meters long bamboo rods to straighten the seedlings. It can prevent the seedlings from hanging root and falling asleep, and help the seedlings take root and turn green.
2 Operation Technology The ZPY-C and Z type throwers operate on the principle of centrifugal force generated by the rotation of the thrower disc, and throw the seedlings fed in the center of the thrower disc evenly and disorderly. In the field, casting operations were completed.
2.1 Throwing and adjusting the test before throwing the engine After starting the engine, disengage the traveling clutch and close the clutch of the casting machine to make the casting disc in working condition. After the rotation speed is stable, take 3 seedlings and put them into the feeding hopper at 3 points. The l strain slides into the casting tray from the left side of the funnel, and it should fall behind the right side of the casting machine after throwing. 1 slide into the caster plate from the right side, the placement point should be in the left rear of the thrower, l plant from the middle of the slide man throwing the plate, the placement should be behind the thrower. The left and right two points should be approximately the same distance from the thrower. The placement point should be basically aligned with the casting disc. If the deviation is large, the two nuts between the funnel and the shroud should be loosened and the funnel adjusted to the left or right. Rotate left, throw right, rotate right, throw left.
2.2 The shuttle walking method is commonly used in the throwing machine operation. In windless weather, it should be decided whether it is horizontal or vertical walking according to the shape of the field. In windy weather, it should be parallel to the wind direction in order to improve the uniformity of casting.
The initial working position of the machine in the field should be about 4 meters from the left or right side of the field, 6 meters from the rear field, and about 4 meters from the front of the field, turning in advance to prevent the seedlings from being thrown. outer.
2.3 Feeding method When feeding fish, two feeding hands should be closely cooperated, one for each time, and the seedlings are thrown into the funnel without interruption. Can not feed two at the same time, if the funnel is blocked by the seedlings, it should be promptly cleaned.
When the l field blocks are left with only 2-4 meters of width left, the tractor can be driven along the center line and only half of the seedlings can be thrown into the funnel mouth. The amount of feed directly determines the throwing density. It should first try to throw a paragraph, determine the density and the number of picking each seedling, and then carry out formal operations to ensure the quality of casting.
2.4 Maintenance of the casting machine The casting tray is the core working part of the casting machine. It should be cleaned and cleaned before and after each use and in use. Remove dirt and debris that adheres to the disk to ensure proper operation of the disk. After use, it should be fully cleaned, maintained, oiled, rust-proofed, and belts should be loosened, then stored in storage.
2.5 Safety Precautions
2.5.1 When troubleshooting, stop and stop.
2.5.2 Careful attention must be paid to the safety of humans and machines when transferring old blocks, crossing trenches, and crossing over fields.
2.5.3 When the wind exceeds level 4, it is necessary to stop casting operations in case of heavy rain, so as not to affect the quality of casting. 2.5.4 When the C-type and Z-type casting machines are walking on the road leading to Daejeon, the rubber wheels should be used and the tail wheels should be installed. When the fields are put into operation, the paddy field wheels should be replaced and the paddy field wheels should not be reversed.
1.1 Technical requirements for seedlings Seedlings used in seedling machines, unlike hand transplanted seedlings, must use seedlings cultivated in “beehole†plastic floppy disks. Whether or not seedlings meet the requirements of a thrower will have a direct impact on the quality and efficiency of the dumping, and even affect the success or failure of mechanized dumping technology. Therefore, it is necessary to combine agronomic and agricultural machinery to cultivate qualified seedlings.
1.1.1 The tray must be a plastic floppy tray with no limitation on specifications.
1.1.2 Seedling height is generally three-leaf and one-hearted, suitable for the range of 80-200 mm. The age of 20-25 days is more suitable.
1.1.3 The soil moisture content of seedlings should be 40%-60%.
1.1.4 seedlings with muddy seedlings root with mud, mud must have a certain viscosity, the formation of muddy, easy to throw and seedlings upright mud.
1.1.5 The quality of seedlings leaves is dark green, robust, and grows evenly. The white roots are entangled, disease-free and flexible.
1.2 Technical requirements for Putian After soaking, Putian should be ploughed, brushed, ground, leveled, and deeply buried with straw (stalks) so that the fields are flat, muddy, muddy and not muddy. "The appearance of melon" water, the surface of the field into a slurry.
1.2.1 Before transplanting, the plowing and plowing field must be settled for 1-2 days according to the soil type. Usually, the paddy field is precipitated for 1-1.50 days. Black clay precipitated for 2-2.50 days. Yellow mud Pakistan precipitation precipitation l-20 days. If the seedlings are thrown into the field without sedimentation, the seedlings will be sucked into the mud with the living mud. Affect seedling growth and low birth.
1.2.2 The depth of water in Putian is generally 1-3 cm. It is best if no mud is exposed. If it is too deep and easy to float, it will be too shallow or waterless, which will increase the forward resistance of the casting machine. The walking trajectory of the casting machine cannot be closed in time, resulting in uneven formation of the Putian. Therefore, the moderation of Putian water is also critical.
1.2.3 When seedlings are thrown into the field and thrown into the field, they cannot stand upright for 3-5 days, or when other factors have fallen (sleep) in the field, artificial remedies can be taken. Artificially applied to the field with 1.50-2.50 centimeters in diameter and 3 meters long bamboo rods to straighten the seedlings. It can prevent the seedlings from hanging root and falling asleep, and help the seedlings take root and turn green.
2 Operation Technology The ZPY-C and Z type throwers operate on the principle of centrifugal force generated by the rotation of the thrower disc, and throw the seedlings fed in the center of the thrower disc evenly and disorderly. In the field, casting operations were completed.
2.1 Throwing and adjusting the test before throwing the engine After starting the engine, disengage the traveling clutch and close the clutch of the casting machine to make the casting disc in working condition. After the rotation speed is stable, take 3 seedlings and put them into the feeding hopper at 3 points. The l strain slides into the casting tray from the left side of the funnel, and it should fall behind the right side of the casting machine after throwing. 1 slide into the caster plate from the right side, the placement point should be in the left rear of the thrower, l plant from the middle of the slide man throwing the plate, the placement should be behind the thrower. The left and right two points should be approximately the same distance from the thrower. The placement point should be basically aligned with the casting disc. If the deviation is large, the two nuts between the funnel and the shroud should be loosened and the funnel adjusted to the left or right. Rotate left, throw right, rotate right, throw left.
2.2 The shuttle walking method is commonly used in the throwing machine operation. In windless weather, it should be decided whether it is horizontal or vertical walking according to the shape of the field. In windy weather, it should be parallel to the wind direction in order to improve the uniformity of casting.
The initial working position of the machine in the field should be about 4 meters from the left or right side of the field, 6 meters from the rear field, and about 4 meters from the front of the field, turning in advance to prevent the seedlings from being thrown. outer.
2.3 Feeding method When feeding fish, two feeding hands should be closely cooperated, one for each time, and the seedlings are thrown into the funnel without interruption. Can not feed two at the same time, if the funnel is blocked by the seedlings, it should be promptly cleaned.
When the l field blocks are left with only 2-4 meters of width left, the tractor can be driven along the center line and only half of the seedlings can be thrown into the funnel mouth. The amount of feed directly determines the throwing density. It should first try to throw a paragraph, determine the density and the number of picking each seedling, and then carry out formal operations to ensure the quality of casting.
2.4 Maintenance of the casting machine The casting tray is the core working part of the casting machine. It should be cleaned and cleaned before and after each use and in use. Remove dirt and debris that adheres to the disk to ensure proper operation of the disk. After use, it should be fully cleaned, maintained, oiled, rust-proofed, and belts should be loosened, then stored in storage.
2.5 Safety Precautions
2.5.1 When troubleshooting, stop and stop.
2.5.2 Careful attention must be paid to the safety of humans and machines when transferring old blocks, crossing trenches, and crossing over fields.
2.5.3 When the wind exceeds level 4, it is necessary to stop casting operations in case of heavy rain, so as not to affect the quality of casting. 2.5.4 When the C-type and Z-type casting machines are walking on the road leading to Daejeon, the rubber wheels should be used and the tail wheels should be installed. When the fields are put into operation, the paddy field wheels should be replaced and the paddy field wheels should not be reversed.
Step one: prepare the ingredients, dried noodles 100g (or wet noodles 150g), chopped green onion, a small bag of the seasoning.
Step two: Wash the green onion, cut into green onion, boil the water and add the prepared noodles.
Step 3: Add boiling water to the pot, add the prepared noodles and cook it in a pot. Add 300-400g of boiling water (better soup) to the bowl and add a small bag of the sauce.
Chongqing Small Noodles Seasoning
Chongqing Small Noodles Seasoning,Chongqing Hotpot Seasoning,Chongqing Small Noodles Sauce,Chongqing Cuisine
ChongQing Baifu Foods Co., Ltd. , http://www.baifufood.com