Conventional continuous-running coating machines often have such problems, the running process is short, and there is great inaccuracy. In addition, the coating of the coating is very thin, because the running time of the machine is limited and some simple pre-processing is required. For this reason, the coating machine needs to install a batch processing program to ensure that the product is finished after the product is finished. The disadvantage is that a lot of loading and unloading procedures are required and the product is subject to mechanical influence. This often requires the use of relatively smaller batch coaters.
It is desirable to eliminate these shortcomings in the development of continuous running coaters, while at the same time converging the advantages of continuous and batch processes into one system. "We hope to meet the requirements of pharmaceutical manufacturers to enable them to produce qualified and over-the-counter drugs in large quantities.
This is technically the case where the material is transported through a coating pan that is divided into different compartments. The pill is placed in the compartment for a certain period of time, then sprayed with a sugar solution and the pill is transported to the next compartment. The product is sent from the first compartment to the second compartment, and then from the second compartment to the third compartment, and so on. This allows the drug to be processed in a quality and quantity, resulting in a combined machine that combines the advantages of continuous and intermittent coaters.
The machine will be customized according to the process technology to ensure the high quality production of the product. The basis for the development of a new machine is usually a wide range of tests carried out on a technical machine, the machine must be able to carry out production tests in the original production scale.
The coating of confectionery, in the case of the confectionery industry, shows how the machine operates in production practice. 1200 kg of product per hour is produced in seven different production steps, where machine accessories with weak soft and compressive capacity will be placed on a 50 kg share line and shipped to compartment 1; after three minutes of operation, the product will Shipped to the second compartment. Then start * production steps - spray colored syrup and sprinkle with sugar. After another three minutes, the product will be transported to the next compartment, where processing will continue. In the eleventh compartment, two layers of fudge will be applied, and then a thin layer of wax will be sprayed on the zui. After the end of a compartment machine after zui, the products will be collected, extracted through a vibrating chute and installed in the finished container.
The dosage of the sugar coating is very important for the production of high quality products, and the basis for ensuring accuracy is the weighing tool in the metering system. The storage container will automatically fill up through a horizontal control system. An exhaust device with a built-in air filter will regulate and dedust the air in the coater to reduce dust contamination in the production environment.
The coating machine is operated by a touch screen. The software is specially designed for this type of machine. All doses and speeds can be selected. In order to meet the hygiene standards of the confectionery industry, the machine is also equipped with an automatic cleaning system. For ease of inspection and cleaning, the dosing system will completely withdraw from the coating pan.
Solas Reflective Tape
1) Material of our Solas Reflective Tape :
Our Marine reflective tape for Safety is based on premium polyester material, SOLAS (Safety of Life at Sea) Grade. The surface is equipped with a highly visible honeycomb pattern , with alternating ultra bright silver color, it ensure the reflective safety tape reflect light better in the dark, with smooth and glossy surface that reflects light in any situation added visibility.the high reflective tape gives you extra security.
2) Certificate of our Solas Reflective Tape :
It is a SOLAS (life safety at sea) certification, please note that there is a SOLAS mark every 4cm on the tape.
3) High luminance
our specially made glass microbead tape is manufactured by professional technology. High visibility ensures safety tape reflects light better in the dark, which will greatly increase visibility during the day and at night. Its unique design of glass microbead pattern gives off bright light when reflecting light. Improve visibility, believe he's right, improve SAFETY and reduce the chance and risk of an accident.
4) Features : Industrial adhesive, easy to apply. PET tape has a strong adhesive force, and a certain degree of flexibility, to resist peeling and tearing, strong adhesion. Stickiness can even outlast life. Our reflective safety sign tape is tough, durable, and able to withstand elements for great indoor or outdoor use, and in continuous efforts for safe human travel...
5) Sizes: We have made this reflective tape into different sizes to facilitate your specific needs. Including heat and humidity.
6) Applications: Reflective tape application is very wide, there are many kinds of application such as car parks, warehouses, storage unit, office, classroom, hospital,, garage, roads, factories, machinery, restaurant, goods, garage doors, truck, boat, mailboxes, helmets, different types of trailer, truck, mailbox, bicycle, car, rv, backpacks, railing, ramp, trailers, drivers, hiking, biking and jogging in the daily use, the danger zone. Our tape has infinite possibilities.
Solas Reflective Tape,solas grade reflective tape, Marine Reflective Tape,High Intensity Reflective Tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com